Heated Seat - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Front seats
Heated seat (if so equipped)
The heated seats can be operated by pushing
the switch when the operation mode of the
power switch is in ON. The indicator light
4
(A) will illuminate while the heater is on.
1 (HI)
- Heater high
(for quick heating)
2 (neutral
- Heater off
position)
3 (LO)
- Heater low
(to keep the seat warm)
4-8
Seat and restraint systems
WARNING
 Persons who are unable to feel tempera-
N00435601450
ture change or skin pain due to age, ill-
ness, injury, medication, alcohol use,
fatigue or other physical conditions or
who have sensitive skin may suffer burns
when using the heated seat even at low
temperatures. To reduce the risk of burns,
people with such conditions must use care
when using the heated seat.
CAUTION
 Switch off the heated seats when not in use.
Operate the heaters at the "HI" position for
quick heating. After the seat has become
warm, set the heater switch to the "LO" posi-
tion to keep it warm. Slight variations in the
seat temperature may be felt while using the
heated seats. This is caused by the operation
of the heater's internal thermostat and does
not indicate a malfunction.
 Do not place heavy objects on the seat or
stick pins, needles, or other pointed objects
into the seat.
 Do not place a blanket, cushion, or other
insulating material on the seat while using
the heater; doing so can cause the heater ele-
ment to overheat.
 When cleaning the seat, do not use benzine,
kerosene, gasoline, alcohol, or other organic
solvents; doing so can cause damage not
only to the surface of the seat, but also to the
heater.
CAUTION
 If water or any other liquid is spilled on the
seat, allow it to dry thoroughly before
attempting to use the heater. Turn the heater
off immediately if it appears to be malfunc-
tioning during use.

Advertisement

Table of Contents
loading

Table of Contents