Air Conditioning Switch - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Dual-zone automatic climate control air conditioner
On vehicles equipped with the Smart-
phone Link Display Audio, screen opera-
tions can also be used to change the
setting. Refer to the separate owner's
manual for details.
NOTE
 The factory setting is "Enable automatic air
selection control".
 When the defogger switch is pressed, the air
selection will automatically change to the
7
outside air position, even if the system is set
to "Disable automatic air selection control",
in order to prevent windows from fogging
up.
7-10
Comfort controls

Air conditioning switch

Press the switch, and the air conditioning
compressor will turn on. The "
(A) will be shown in the display.
Press the switch again and the air condition-
ing compressor will stop and the indicator
goes off.
NOTE
 If a problem is detected in the air condition-
ing compressor, the "
" indicator blinks.
Press the air conditioning switch once to turn
it off, then once more to turn it back on. If
the"
" indicator does not blink, there is no
problem. If it does blink, have it checked at a
certified Mitsubishi EV dealer.
NOTE
 For example, sometimes after using a high-
N00737301496
pressure car wash, the condenser can get wet,
" indicator
and the "
" indicator blinks temporarily.
Wait for a while, press the air conditioning
switch once to turn the system off, then once
more to turn it back on. Once the water evap-
orates, the blinking will stop.
 Personalizing the air conditioning
switch (Changing the function set-
ting)
You can change the following functions to
match your preference.
 Enable automatic air conditioning control:
When the AUTO switch is pressed, or
when the temperature control switch has
been set to the minimum temperature, the
air conditioning switch is automatically
controlled.
 Disable automatic air conditioning con-
trol:
The air conditioning switch is not auto-
matically controlled, unless the air condi-
tioning switch is used.
 Changing the settings
Press the air conditioning switch for
approximately 10 seconds or longer.
N00712200077

Advertisement

Table of Contents
loading

Table of Contents