Selector Lever (Joystick Type); Selector Lever Operation - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

NOTE
 When shifting to or from the "P" (PARK)
position, you may hear an operation noise
and/or feel vibration. This is normal.
 If the electrical parking switch and the selec-
tor lever are repeatedly operated in a short
time period, shifting from or to the "P"
(PARK) position will temporarily
restricted to protect the system.
If this occurs, wait for a while and then oper-
ate the electrical parking switch or the selec-
tor lever again.
Electrical Parking switch
reminder buzzer
If the vehicle is stationary and the driver's
door is opened while the select position is not
in the "P" (PARK) position, a buzzer will
sound to remind you to press the electrical
parking switch.
Selector Lever (Joystick
type)
be

Selector Lever (Joystick type)

Selector lever operation

The selector lever always returns to its home
N00583600035
() position when it is released.
The position you select with the selector lever
will be illuminated on the shift position panel
shown in the illustration below.
Move the selector lever slowly and securely
in the following method.
 To
select "D"
(REVERSE):
Move the selector lever in the direction of
the arrow.
 To select "N" (NEUTRAL):
Move the selector lever in the direction of
the arrow and hold it for a while.
 To select "B"
BRAKE):
Move the selector lever in the direction of
the arrow.
Features and controls
N00583700036
5
Home
position
(DRIVE) or "R"
(REGENERATIVE
5-53