How To Use Brake Auto Hold - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

WARNING
 Driving with worn brake pads will make it
harder to stop, and can cause an accident.
Brake auto hold
When the vehicle is stopped at traffic lights
etc., the vehicle can be held stationary with
the brake auto hold system even if you
release your foot from the brake pedal.
When the accelerator pedal is depressed, the
brakes are released.
WARNING
 Do not overly rely on the brake auto hold
system. On steep slope, depress the brake
pedal firmly because the system may not
hold the vehicle stationary.
 Never leave the vehicle while it is being
stopped by the brake auto hold system.
When leaving the vehicle, apply the park-
ing brake and shift the select position to
the "P" (PARK) position.
 Do not use brake auto hold system when
driving on slippery roads. The system may
not hold the vehicle stationary and could
result in an accident.
NOTE
 While operating the brake auto hold system,
you may hear an operation noise to increase
braking force when the system detected the
movement of the vehicle. This does not indi-
cate a malfunction.
N00592000051
Brake auto hold

How to use brake auto hold

To turn on brake auto hold
If the brake auto hold switch is pressed while
all of the following conditions are met, the
system will change to the standby state and
the indicator light (A) on the switch comes
on.
 The operation mode of the power switch
is in ON.
 The driver's seat belt is fastened.
 The driver's door is closed.
Features and controls
5
5-69