Operating The Power Liftgate Using The F.a.s.t.-Key - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Power liftgate (if so equipped)
 The operation mode is in ON with the
select position in the "P" (PARK) posi-
tion, or the operation mode is in OFF or
ACC.
 The power liftgate is completely open.
 Nothing is touching the auto reverse sen-
sors on the power liftgate.
5
5-30
Features and controls
Operating the power liftgate using
the F.A.S.T.-key or the driver's
side power liftgate switch
After unlocking the doors and the power lift-
gate, the power liftgate can be operated by
pressing the switch (A) of the F.A.S.T.-key or
the driver's side power liftgate switch (B).
<Using the F.A.S.T.-key>
If the power liftgate switch is pressed twice in
a row, the power liftgate operates after the
warning buzzer sounds and the hazard warn-
ing flasher blinks.
The power liftgate operates as follows:
•While closed: The warning buzzer sounds
and the power liftgate com-
pletely opens.
•While open: The warning buzzer sounds
and the power liftgate com-
pletely closes.
If the power liftgate switch is pressed once
while the power liftgate is operating, the
warning buzzer sounds and the liftgate will
reverse and return to the full open or closed
position.
NOTE
 If the power liftgate switch is pressed three
or more times in a row, the power liftgate
may not operate normally.
If this occurs, wait a short time before again
pressing the power liftgate switch twice.
<Using the driver's side power liftgate
switch>
If the driver's side power liftgate switch is
pressed for more than 1 second, the power
liftgate will operate after the buzzer sounds
and the hazard warning flasher blinks.

Advertisement

Table of Contents
loading

Table of Contents