Making A Flat Seat - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

• Make sure that the seat belt is not
twisted.
For details, refer to "Detachable center
seat belt for rear seat" on 4-19.

Making a flat seat

The entire interior of the vehicle may be used
for sleeping accommodations by removing
the head restraints and fully reclining all the
seats when the vehicle is stopped.
WARNING
 Never drive with passengers or cargo on
the flat seat. This is extremely dangerous
and can cause severe or fatal injury or
death in an accident or if heavy braking is
required.
CAUTION
 Adjust the seats only when the vehicle is
stopped in a safe place.
 Seat should be adjusted only by adults to
avoid accidents.
 When sliding the seats, be careful not to
catch your hand or leg.
 Do not walk around on top of the seats after
they have been laid flat because the footing
is uneven. It is safest to move about on your
hands and knees.
 To ensure the seats are locked securely,
attempt to move them back and forth.
 Do not jump on or drop heavy objects on the
seatbacks.
 To raise the seatback of the front seat, firmly
place your hand on the seatback, pull the
seatback lock knob up, and raise the seatback
N00404801179
slowly. (Refer to "To adjust the seatback" on
page 4-6.) Do not let children adjust the seat-
back.
Making a flat seat
1. Remove the head restraints from the front
seats and raise the arm rest on the rear
seats.
For vehicles with a cargo area cover,
remove the cover.
(Refer to "Head restraints" on page 4-10,
"Arm rest" on page 4-9 and "Cargo area
cover" on page 5-213.)
Seat and restraint systems
4
4-15