Homelink® Wireless Control System (If So Equipped) - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

NOTE
 When the remaining power in the main drive
lithium-ion battery is low, the engine starts
and charges the main drive lithium-ion bat-
tery automatically. Be careful not to run out
of fuel since it will be consumed when the
engine starts.
®
HomeLink Wireless Con-
trol System
(if so equipped)
®
HomeLink Wireless Control System is a
registered trademark of Gentex Corporation.
®
HomeLink provides a convenient way to
replace up to 3 hand-held radio-frequency
(RF) transmitters used to activate devices
such as gate operators, garage door openers,
entry door locks, security systems, even home
®
lighting. Additional HomeLink
can be found at www.homelink.com,
www.youtube.com/HomeLinkGentex, or by
®
calling the toll-free HomeLink
800-355-3515.
WARNING
 Do not use HomeLink
door opener that lacks safety stop and
reverse features as required by U.S. Fed-
eral Regulations. A garage door opener
which cannot detect an object in the path
of a closing garage door and then auto-
matically stop and reverse, does not meet
current U.S. Federal Regulations. Using a
garage door opener without these features
increases the risk of serious injury or
death.
N00554301040
 During programming, your garage door
or gate may open or close. Make sure that
people and objects are clear of the garage
door or gate that you are programming.
NOTE
 Once HomeLink
original transmitter for future programming
information
procedures (for example, new vehicle pur-
chases). Upon sale of the vehicle, the pro-
grammed HomeLink
-Hotline at 1-
erased for security purposes. Refer to
"Cleaning the programmed information" on
page 5-205.
HomeLink® Wireless Control System (if so equipped)
®
with any garage
®
is programmed, retain the
®
buttons should be
NOTE
 You can program a maximum of 3 devices.
To change or replace any of the 3 devices
after it has been initially programmed, you
must first erase the current settings.
See "Cleaning the programmed information"
on page 5-205 or "Reprogramming a single
®
HomeLink button" on page 5-205.
1- HomeLink ®
button 1
2- HomeLink ®
button 2
3- HomeLink ®
button 3
Features and controls
5
5-201