Using The Latch (Lower Anchors And Tethers For Children) System - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Child restraint systems
Installing a child restraint sys-
tem using the LATCH (Lower
Anchors and Tethers for chil-
dren) system
4
Lower anchor locations
The outboard seating positions in the rear seat
of your vehicle are equipped with lower
anchors for attaching child restraint systems
compatible with the LATCH system.
NOTE
 The symbols on the seatback show the loca-
tion of the lower anchor points.
4-28 Seat and restraint systems
Tether anchor locations
Your vehicle has three attachment points on
the backside of the rear seats. These are for
securing a child restraint system tether strap
to each of the three rear seating positions in
N00418801170
your vehicle.
Examples of child restraint sys-
tems compatible with the LATCH
N00418901256
system
A- Rear-facing child restraint system
B- Front-facing child restraint system
C- Child restraint system lower anchor
connectors
D- Tether strap
(These are only examples.)
Using the LATCH system
1. In order to securely fasten the tether strap,
remove the head restraint from the loca-
tion where you wish to install the child
restraint system.
2. Open the gap a little between the seat
cushion (A) and the seatback (B) with
your hand to locate the lower anchors (C).
N00419000198
N00419101330