Trailer Towing; Roof Carrier Mounting Bracket Cover - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Table of Contents

Advertisement

Trailer towing

CAUTION
 Before driving and after traveling a short dis-
tance, always check the load to make sure it
is securely fastened to the roof carrier.
Stop the vehicle periodically and check that
the load remains secure. If the load is not
secure, it could fall from the vehicle and
damage your vehicle, another vehicle or cre-
ate a road hazard.
6
NOTE
 To prevent wind noise or reduction in gas
mileage, remove the roof carrier when not in
use.
 Before using an automatic car wash, check
with the attendant to determine if the roof
carrier should be removed.
Roof carrier mounting bracket
cover
(if so equipped)
When installing the roof carrier, use the pro-
vided brackets.
The brackets are located under each cover.
To remove the covers
1. Slide each cover (A) toward the front of
the vehicle.
2. Lift the front edge of the cover (A).
6-12
Driving safety
Section
*: Front of the vehicle
N00630601112
To install the covers
Install the covers by performing the removal
step in reverse.
Trailer towing
Towing a trailer will adversely affect your
vehicle's handling, performance, braking,
durability and driving economy (fuel con-
sumption, etc.).
If you do tow a trailer with this vehicle, be
sure to use proper equipment and cautious
steering and braking for safe driving.
CAUTION
 Do not lose control of your vehicle when
towing a trailer.
• Always use proper equipment.
• Always drive carefully
 Damage to your vehicle caused by improper
equipment or driving is not covered by your
warranty.
NOTE
 We recommend that you charge the main
drive lithium-ion battery before towing a
trailer.
N00629801345

Advertisement

Table of Contents
loading

Table of Contents