Changing The Temperature Unit - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to change from the setting mode
screen to the menu screen.
Refer to "Changing the function settings"
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select "AVG UNIT" (fuel
consumption display unit setting).
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to display "AVG UNIT" (fuel
consumption display unit setting).
4. Lightly press the multi-information dis-
play switch to switch to select the units.
5. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to change the setting to the
selected unit.
NOTE
 The display units for the average fuel con-
sumption and the driving range are changed,
but the units for the indicating needle (speed-
ometer), the odometer and the trip odometer
will remain unchanged.
 If the 12 V starter battery is disconnected,
the memory of the unit setting is erased and
is automatically set to {mpg (US) or L/100
km}.
The distance and speed units are also changed
in the following combinations to match the
selected fuel consumption unit.
Fuel Distance
economy (driving range)
mpg (US) mile (s)
mpg (UK) mile (s)
km /L
L /100 km

Changing the temperature unit

The temperature display unit can be switched.
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings"
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select "
unit setting).
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch in from °F to °C, or
from °C to °F.
The setting is changed to the selected tem-
perature unit.
NOTE
 The temperature value on air conditioner
panel is switched in conjunction with outside
temperature display unit of the multi-infor-
mation display.
However, "°F" or "°C" are not shown to tem-
perature display of an air conditioner.
 On vehicles equipped with the Smartphone
Link Display Audio, the temperature value
km
of the Smartphone Link Display Audio is
switched in conjunction with outside temper-
km
ature display unit of the multi-information
display.
 If the 12 V starter battery is disconnected,
the memory of the unit setting is erased and
N00557201226
is automatically set to °F (°C).
Features and controls
Multi-information display
" (temperature
5-145
5