To Increase The Set Speed; Res + Switch; Accelerator Pedal; To Decrease The Set Speed - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Cruise control (if so equipped)
2. Accelerate or decelerate to your desired
speed, then push down and release the
SET - switch (B). The "SET" indicator
appears on the information display in the
multi-information display. The vehicle
will then maintain the desired speed.
5
NOTE
 When you release the SET - switch (B), the
vehicle speed will be set.

To increase the set speed

There are 2 ways to increase the set speed.
5-80 Features and controls

RES + switch

Push up and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the RES + switch (C) for less than
approximately 1 second and release it.
Each time you press the RES + switch (C),
your vehicle will go approximately 1 mph
N00518501396
(1.6 km/h) faster.

Accelerator pedal

While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the SET - switch (B) and
release the switch momentarily to set a new
desired cruising speed.

To decrease the set speed

There are 2 ways to decrease the set speed.
N00518601326