Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 184

Table of Contents

Advertisement

If the EV priority mode is activated, the fol-
lowing display appears on the information
screen in the multi-information display.
NOTE
 While driving the vehicle in EV priority
mode, if the engine automatically starts
while the vehicle is accelerating, the vehicle
may accelerate more quickly.
 In the following conditions, the EV priority
mode cannot be used even if the EV switch is
pressed, a buzzer will sound and the message
will appear in the multi-information display.
• When the remaining power in the main
drive lithium-ion battery is low.
Charge the main drive lithium-ion battery.
NOTE
• When the cruise control or the Adaptive
Cruise Control system (ACC) is operating.
If you want to use the EV priority mode,
cancel the cruise control or the ACC.
• When using the EV priority mode is limited
to protect the Plug-in Hybrid EV System, or
when outside temperature is too cold.
 While the following message is displayed in
the multi-information display, the EV prior-
ity mode cannot be used even if the EV
switch is pressed, a buzzer will sound.
 In any of the situations listed below, the EV
priority mode will be automatically canceled
and the message will appear in the multi-
information display.
EV switch
NOTE
• When the remaining power in the main
drive lithium-ion battery becomes low.
Charge the main drive lithium-ion battery.
• When the vehicle speed of the cruise con-
trol or the ACC is set.
If you want to use the EV priority mode,
cancel the cruise control or the ACC.
• When the protecting device of the Plug-in
Hybrid EV System is operated.
Features and controls
5
5-63

Advertisement

Table of Contents
loading

Table of Contents