Changing The Reset Mode For Average Fuel Consumption; Changing The Fuel Consumption Display Unit - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Multi-information display
NOTE
 If the 12 V starter battery is disconnected,
these function settings are reset from mem-
ory and is automatically to the factory set-
tings (except the tire ID set).
 You cannot select an item that is displayed
dimly on the menu.
5
Changing the reset mode for aver-
age fuel consumption
You can change the mode condition for the
average fuel consumption to "Auto reset" or
"Manual reset."
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings"
on page 5-143.
5-144 Features and controls
2. Lightly press the multi-information dis-
play switch to select "AVG" (average fuel
consumption setting).
N00557001279
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch in sequence from A or
1 (Auto reset)  M, 2 or P (Manual reset)
 A or 1 (Auto reset).
The setting is changed to the selected
reset condition.
Manual reset mode
 If you press and hold the multi-informa-
tion meter switch when the average fuel
consumption is displayed, these calcula-
tions will be reset to zero.
 When the operation mode is changed
from ACC or OFF to ON, the mode set-
ting changes automatically from manual
to auto.
Auto reset mode
 When the average fuel consumption is
being displayed, if you hold down the
multi-information display switch, these
calculations will be reset to zero.
 When the operation mode has been in
ACC or OFF for approximately 4 hours or
more, the average fuel consumption dis-
play will automatically reset.
NOTE
 The average fuel consumption display can be
reset separately in both auto reset mode and
manual reset mode.
 Disconnecting the 12 V starter battery cable
will erase from memory the manual reset
mode or auto reset mode setting for the aver-
age fuel consumption display.
 The initial (default) setting is "Auto reset
mode".
Changing the fuel consumption
display unit
The fuel consumption display unit can be
changed. The distance and amount units are
also changed to match the selected fuel con-
sumption unit.
N00557101209