Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 289

Indicator light, warning light, and information screen display list
Other interrupt displays
Screen
5
5-168 Features and controls
Cause
 When you pressed the power switch and
the operation mode become the ACC with-
out depress the brake pedal, this screen is
displayed.
This screen will be displayed repeatedly at
regular intervals while the operation mode
of the power switch is put in ACC.
 When Plug-in Hybrid EV System does not
start even if the operation mode of the
power switch is put in ON, this screen is
displayed.
 When starting the Plug-in Hybrid EV Sys-
tem, you pressed the power switch without
select position in the "P" (PARK) position.
 Driving power is restricted by the safety
system as the Plug-in Hybrid EV System
has become too hot or too cold.
Do this (Reference)
 Place the select position in the "P" (PARK)
position, depress the brake pedal more
firmly than usual with the right foot. Then,
press the power switch.
Refer to "Starting the Plug-in Hybrid EV
System" on page 5-14.
 Place the select position in the "P" (PARK)
position by pressing the electrical parking
switch, depress the brake pedal more
firmly than usual with the right foot. Then,
press the power switch.
Refer to "Starting the Plug-in Hybrid EV
System" on page 5-14.
 You do not have to take any actions. The
restriction on the driving power will be
released when the Plug-in Hybrid EV Sys-
tem returns to the normal temperature.
N00558201366