Setting The Ldw Mode - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Lane Departure Warning System (LDW) (if so equipped)
5
WARNING
 Never rely solely on the LDW. The LDW is
not a collision avoidance system and is not
a substitute for your safe and careful driv-
ing.
 Before using the LDW, read this entire
section to understand the limitations of
this system. Failure to follow instructions
could result in an accident.
5-110 Features and controls

Setting the LDW mode

From the factory, the LDW mode of your
vehicle is set to LDW 1 meaning that every
time the operation mode of the power switch
is put in ON, the LDW will automatically be
activated.
The "LDW" indicator will appear on the
information screen of the multi-information
display,
You can set your vehicle to LDW 2. This
means that your vehicle, every time the oper-
ation mode of the power switch is put in ON,
will always use the LDW mode that was
being used at the time the vehicle operation
mode was put in OFF.
To set the LDW mode:
1. Press the LDW switch to turn off the
LDW system.
2. Press again and hold the LDW switch for
more than 10 seconds.
3. When you release the LDW switch, the
LDW mode is changed and it appears on
N00578000073
the multi-information display.
or