Table of Contents
Advertisement
Multi-information display
Changing the display language
The language of the multi-information dis-
play can be changed.
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
5
or more) to change from the setting mode
screen to the menu screen.
Refer to "Changing the function settings"
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select "LANGUAGE" (lan-
guage setting).
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to display "LANGUAGE" (lan-
guage setting).
4. Lightly press the multi-information dis-
play switch to select the desired language.
5-146
Features and controls
5. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
N00557301214
or more) to change the setting to the
selected language.
NOTE
If the 12 V starter battery is disconnected,
the memory of the language setting is erased
and is automatically set to ENGLISH.
If "---" is selected in the language setting, a
warning message is not displayed when there
is a warning display or interrupt display.
Changing the language on other
system to match the multi-infor-
mation display
The language used in Multi Around Monitor
(if so equipped) can be changed automatically
to the same language as that shown in the
multi-information display.
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen. Refer to
"Changing the function settings" on page
5-143.
2. Lightly press the multi-information dis-
play switch to select "
cooperative control).
3. Press and hold the multi-information dis-
play switch to switch from A/1 (language
cooperation: enabled) to M/2/P (language
cooperation: disabled), or from M/2/P to
N00529801357
A/1. The setting is changed to the selected
condition.
NOTE
If the 12 V starter battery is disconnected,
the language cooperative control is automati-
cally set to "A or 1" (language cooperation:
enabled).
The language cooperation setting can be
switched in the following manner.
" (language
Advertisement
Table of Contents
