Returning To The Factory Settings - Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual

Multi-information display
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings"
on page 5-143.
2. Lightly press the multi-information dis-
5
play switch to select
turn signal sound)
3. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from 1 (turn-signal
sound 1) to 2 (turn-signal sound 2), or
from 2 to 1.
The setting changes to the selected turn
signal sound.

Returning to the factory settings

Many of the function settings can be returned
to their factory settings.
1. Press and hold the multi-information dis-
play switch (for approximately 2 seconds
or more) to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings"
on page 5-143.
2. Lightly press the multi-information dis-
play switch to select "RESET" (return to
the factory settings).
5-148 Features and controls
3. Press and hold the multi-information dis-
play switch (for approximately 5 seconds
or more), the buzzer sounds and all of the
function settings are returned to the fac-
tory settings.
NOTE
. (changing the
 The factory settings are as follows.
• Average fuel consumption reset mode: A
(Auto reset)
• Fuel consumption display unit: mpg (US)
or (L/100 km)
• Temperature unit: °F (Fahrenheit) or {°C
(Celsius)}
• Display language: ENGLISH
• Cooperative language setting: A (language
cooperation: enabled)
• Operation sounds: ON (Operation sound
on)
N00557601246
• "REST REMINDER" display: OFF
• Turn signal sound: Turn signal sound 1
 The tire ID set cannot be returned to the fac-
tory settings.