Mitsubishi MOTORS Outlander PHEV 2018 Owner's Manual page 362

Table of Contents

Advertisement

NOTE
 When the engine coolant temperature is low,
the air temperature from the heater will not
change instantly, even if you have selected
warm air with the switch.
To prevent the windshield and windows from
fogging up, the vent mode will be changed to
"
" and the blower speed will be reduced
while the system is operating in the AUTO
mode.
 When you feel that it is hotter or colder than
the set temperature, you may adjust it to your
preference.
For further information, we recommend you
to consult a certified Mitsubishi EV dealer.
 When the temperature is set to the highest or
the lowest setting, the air selection and the
air conditioner will be automatically changed
as follows.
Also, if the air selection is operated manually
after an automatic changeover, manual oper-
ation will be selected.
• Quick Heating (When the temperature is set
to the highest setting)
Outside air will be introduced and the air
conditioner will stop.
• Quick Cooling (When the temperature is set
to the lowest setting)
Inside air will be recirculated and the air
conditioner will operate.
The above indicates the factory settings. You
can personalize the air selection switch and
air conditioning switch to match your per-
sonal preferences.
Contact a certified Mitsubishi EV dealer for
assistance.
Refer to "Personalizing the air conditioning
switch (Changing the function setting)" on
page7-10.
Refer to "Personalizing the air selection
(Changing the function setting)" on page7-9.
 Synchronized mode and dual mode
The driver's side and the passenger's side
temperature can be controlled independently.
At this time, the "DUAL" indicator (A) will
be shown in the display.
Dual-zone automatic climate control air conditioner
 Synchronized mode
If the driver's side temperature control
switch is pressed, the passenger's side
temperature will also be controlled to the
same setting temperature as the driver's
side.
 Dual mode
If the passenger's side temperature con-
trol switch is pressed under synchronized
mode, the system will switch to dual
mode. In dual mode, the driver's side and
the passenger's side temperature can be
set separately by using each temperature
control switch.
Press the AUTO switch to return to syn-
chronized mode.
Comfort controls
7
7-7

Advertisement

Table of Contents
loading

Table of Contents