USB input terminal
USB input terminal
You can connect your USB memory device or
iPod* to play music files stored in the USB
memory device or iPod.
This section explains how to connect and
remove a USB memory device or iPod.
5
Refer to the separate owner's manual for
details on the types of connectable devices
and supported files, and how to play music
files.
*: "iPod" is a registered trademark of Apple
Inc. in the United States and other countries.
How to connect a USB memory
device
1. Park your vehicle in a safe place and put
the operation mode of the power switch in
OFF.
5-194
Features and controls
2. Open the USB input terminal cover (A) in
the floor console box.
N00566701201
3. Connect a commercially available USB
connector cable (C) to the USB memory
device (B).
N00566801202
4. Connect the USB connector cable (C) to
the USB input terminal (D).
CAUTION
Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
When closing the floor console box, be care-
ful not to trap the USB connector cable.
5. To remove the USB connector cable, put
the operation mode of the power switch in
OFF first and perform the installation
steps in reverse.