Table of Contents
Advertisement
NOTE
If the sensor or its surrounding area becomes
extremely high temperature when parking
the vehicle under a blazing sun, the "AHB
SERVICE REQUIRED" warning display
may appear.
If the message remains even after the tem-
perature of the sensor or its surrounding area
has been in range, please contact a certified
Mitsubishi EV dealer.
Sensor is too hot or cold
If the AHB becomes temporarily unavailable
due to the high or low temperature of the sen-
sor, the following warning display will
appear.
After the temperature of the sensor has been
in range, the system will automatically return
to operation.
If the warning display does not disappear
after waiting for a while, there is a possibility
that the AHB has a malfunction. Contact a
certified Mitsubishi EV dealer for inspection
of the system.
Windshield is dirty
If the AHB determines that its performance
has been degraded, the warning display will
appear.
This can occur when
Foreign objects, such as dirt, snow or ice,
adhere to the windshield of the sensor
portion.
In adverse weather conditions, such as
rain, snow, sand storms, etc.
A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.
When the sensor performance returns, the
AHB will resume operation.
If the warning display does not disappear
after waiting for a while, there is a possibility
that the sensor has a malfunction. Contact a
certified Mitsubishi EV dealer for inspection
of the sensor.
Combination headlights and dimmer switch
Welcome light
This function turns on the front side-marker
and parking lights for approximately 30 sec-
onds after the UNLOCK button on the
F.A.S.T.-Key is pressed when the combina-
tion headlights and dimmer switch is in the
"OFF" or "AUTO" position. The welcome
light function will operate only when it is
dark outside the vehicle.
NOTE
While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
• Press the LOCK button on the F.A.S.T.-
Key.
• Turn the combination headlights and dim-
mer switch to the "
" or "
• Put the operation mode in ON.
It is possible to modify functions as follows:
• The headlights can be set to come on in the
low beam setting.
• The welcome light function can be deacti-
vated.
For details, consult a certified Mitsubishi EV
dealer.
On vehicles equipped with the Smartphone
Link Display Audio, screen operations can
be used to make the adjustment.
Refer to the separate owner's manual for
details.
Features and controls
N00563201276
5
" position.
5-183
Advertisement
Table of Contents
