Table of Contents
Advertisement
Cruise control (if so equipped)
To temporarily decrease the speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the RES + switch (C).
Refer to "To resume the set speed" on page
5-82.
5
To deactivate
The set speed driving can be deactivated as
follows:
Press the CRUISE CONTROL ON/OFF
switch (A) (Cruise control will be turned
off.)
Press the CANCEL switch (D).
5-82
Features and controls
Depress the brake pedal.
The set speed driving is deactivated automati-
cally in any of the following ways.
When your speed slows to approximately
10 mph (15 km/h) or more below the set
speed because of a hill, etc.
When your speed slows to approximately
25 mph (40 km/h) or less.
When the active stability control (ASC)
starts operating.
N00518801621
Refer to "Active stability control (ASC)"
on page 5-76.
WARNING
Although the set speed driving will be
deactivated when shifting to the "N"
(NEUTRAL) position, never move the
selector lever to the "N" (NEUTRAL)
position while driving.
You would have no regenerative braking
and could cause a serious accident.
CAUTION
When the set speed driving is deactivated
automatically in any situation other than
those listed above, there may be a system
malfunction.
Press the CRUISE CONTROL ON/OFF
switch to turn off the cruise control and have
your vehicle inspected by a certified Mit-
subishi EV dealer.
To resume the set speed
If the set speed driving is deactivated by the
condition described in "To deactivate" on
page 5-82, you can resume the previously set
speed by push up the RES+ switch (C) while
driving at a speed of approximately 25 mph
(40 km/h) or higher.
The "SET" indicator appears on the informa-
tion display in the meter cluster.
N00518901390
Advertisement
Table of Contents
