Table of Contents
Advertisement
Network protocols
8.2 IPv6 protocol
8.1.3.4
dcp forwarding
Description
With this command, you configure the forwarding behavior of the interface for DCP frames.
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
dcp forwarding {block|forward}
The parameters have the following meaning:
Parameter
block
forward
Result
The forwarding behavior of the interface for DCP frames is configured.
8.2
IPv6 protocol
This section describes the commands relevant for working with IPv6.
8.2.1
Configuration matrix
Address configuration in
WBM
(System > Agent IPv6)
Automatic
DHCPv6
SLAAC
Static
358
Description
DCP frames are discarded
DCP frames are forwarded
Default: forward
ipv6 address autocon‐
fig
x
-
x
-
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
CLI commands
ipv6 address dhcp
x
x
-
-
Configuration Manual, 09/2017, C79000-G8976-C324-08
ipv6 address
-
-
-
x
Hide quick links:
Advertisement
Table of Contents
