Table of Contents
Advertisement
Network protocols
8.4 DHCPv6 client (IPv6)
Syntax
Call up the command with the following parameters:
show ipv6 dhcp interface
type> <interface-id>}]
The parameters have the following meaning:
Parameter
vlan
vlan-id
interface-
type
interface-
id
For information on names of addresses and interfaces, refer to the section "AUTOHOTSPOT".
Result
The information is displayed.
See also
Interface identifiers and addresses (Page 29)
8.4.2.3
show ipv6 dhcp client statistics
Description
With this command, you display the statistics of the DHCPv6 client. It provides information
about how many PDUs were received or sent per interface.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
show ipv6 dhcp client statistics [interface {vlan <vlan-id(1-4094)>
| <interface-type> <interface-id>} ]
384
[{vlan <vlan-id(1-4094)> | <interface-
Description
Keyword for a VLAN connection
Number of the addressed VLAN
Type or speed of the interface
Module no. and port no. of the interface
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
-
1 ... 4094
Enter a valid interface.
Configuration Manual, 09/2017, C79000-G8976-C324-08
Hide quick links:
Advertisement
Table of Contents
