Show Spanning-Tree Mst Interface - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

The parameters have the following meaning:

The settings for the spanning tree configuration are displayed.

Further notes

You display the general settings for the Spanning Tree Protocol with the show spanning-

tree command.

show spanning-tree mst interface

This command shows port-specific settings of a Multiple Spanning Tree configuration.

You are in the User EXEC mode or in the Privileged EXEC mode.

The command prompt is as follows:

cli> or cli#

Call up the command with one of the following parameter assignments:

show spanning-tree mst

[<instance-id(1-64|4094)>] interface<interface-type><interface-id>

The parameters have the following meaning:

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Configuration Manual, 09/2017, C79000-G8976-C324-08

Number of the instance or range of in‐

stances whose settings are displayed

Shows detailed information about the

selected interface

[{stats|hello-time|detail}]

Number of the instance or range of instances

whose settings are displayed

Type or speed of the interface

Module no. and port no. of the interface

Network structures

7.3 Spanning Tree

Range of values / note

Range of values / note

Enter a valid interface.

Show Quick Links

Table of Contents