Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp targetparams <ParamName>
The parameters have the following meaning:
Parameter
ParamName
user
UserName
security-model
message-
processing
Keywords need to be specified.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
user <UserName>
security-model {v1|v2c|v3 {auth|noauth|priv}}
message-processing {v1|v2c|v3}[{volatile|nonvolatile}]
Description
Name of the SNMP parameter
Keyword for the user name
Value for the user name
Specifies which SNMP version is used.
With SNMPv3 a security level (authen‐
tication, encryption) can also be config‐
ured.
Specifies which SNMP version is used
for processing the messages and
whether the settings remain following a
restart.
Network protocols
8.6 SNMP
Range of values / note
max. 32 characters
-
max. 32 characters
● SNMP version
–
v1
–
v2c
–
v3
● Security level for v3
–
auth
Authentication enabled / no
encryption enabled
–
noauth
No authentication enabled,
no encryption enabled
–
priv
Authentication enabled /
encryption enabled
● SNMP version
–
v1
–
v2c
–
v3
● Settings after the restart
–
:
The settings are lost after a
restart
–
:
The settings are retained
after a restart
429