The "Show" Commands; Show Wlan Aeroscout - Siemens SCALANCE W770 Series Configuration Manuals

Note
The AeroScout function cannot be combined with other iFeatures (IPCF, iREF). AeroScout
can only be used in the 2.4 GHz band according to IEEE 802.11g.
For more detailed information, please refer to the documentation of the AeroScout company
(www.aeroscout.com).
5.8.1

The "show" commands

This section describes commands with which you display various settings.
5.8.1.1

show wlan aeroscout

Description
This command shows the configuration for the AeroScout function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show wlan aeroscout <wlan 0/X>
The parameters have the following meaning:
Parameter
wlan 0/X
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 29)".
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
WLAN interface
Functions specific to SCALANCE
5.8 AeroScout
Range of values / note
Enter a valid interface.
153