Coordinates Latitude - Siemens SCALANCE W770 Series Configuration Manuals

Configuration
4.1 System
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates height <meter>
The parameter has the following meaning:
Parameter
meter
Result
The height coordinate is created.
4.1.10.2

coordinates latitude

Description
With this command, you enter a latitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates latitude <latitude>
The parameter has the following meaning:
Parameter
latitude
66
Description
Input box for the height coordinate
Description
Input box for the latitude coordinate
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the height coordinate in quotes:
coordinates height "123
456"
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the latitude coordinate in quotes:
coordinates latitude
"123 456"
Configuration Manual, 09/2017, C79000-G8976-C324-08