System Time; System Time Setting; The "Show" Commands; Show Time - Siemens SCALANCE W770 Series Configuration Manuals

System time

This part contains the sections describing how the system time is obtained and the settings.
6.1

System time setting

This section describes commands relevant for the configuration of the system time.
6.1.1

The "show" commands

This section describes commands with which you display various settings.
6.1.1.1

show time

Description
This command shows the settings of the system clock.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show time
Result
The settings for the system clock are displayed.
6.1.1.2

show dst info

Description
This command shows all the entries for daylight saving time stored on the device.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
6
167