Show Logbook - Siemens SCALANCE W770 Series Configuration Manuals

Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show events fault counter
Result
The number of indicated faults is displayed.
12.1.1.7

show logbook

Description
With this command, you display the content of the logbook. The log entries are categorized
differently.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
The parameters have the following meaning:
Parameter
info
warning
critical
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
All log entries of the categories "Information", "Warning" and "Critical" are
displayed.
All log entries of the categories "Warning" and "Critical" are displayed.
All log entries of the category "Critical" are displayed.
Diagnostics
12.1 Diagnostics
585