No Snmp User - Siemens SCALANCE W770 Series Configuration Manuals

Parameter
passwd
Storage type
If optional parameters are not specified when configuring an SNMP user, the default values
apply.
Result
The details of an SNMP user are configured.
Further notes
You delete the settings with the no snmp user command.
You display the configured users with the show snmp usercommand.
8.6.2.23

no snmp user

Description
With this command, you delete the details of an SNMP user.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp user <UserName>
The parameter has the following meaning:
Parameter
UserName
Result
The details of an SNMP user are deleted.
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Description
Value for the password of the encryption max. 32 characters
Specifies whether the settings remain
following a restart.
Description
Name of the user
Network protocols
8.6 SNMP
Range of values / note
● volatile:
The default settings are used
after a restart.
● nonvolatile:
The saved settings are used
after a restart.
Range of values / note
max. 32 characters
433