The "Show" Commands; Show Snmp; Show Snmp Community - Siemens SCALANCE W770 Series Configuration Manuals

8.6.1

The "show" commands

This section describes commands with which you display various settings.
8.6.1.1

show snmp

Description
This command shows the status information of SNMP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp
Result
The status information is displayed.
8.6.1.2

show snmp community

Description
This command shows the details of the configured of SNMP communities.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp community
SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface
Configuration Manual, 09/2017, C79000-G8976-C324-08
Network protocols
8.6 SNMP
407