Wlan Ssid-Table Edit (Client) - Siemens SCALANCE W770 Series Configuration Manuals

Simatic net industrial wireless lan ieee 802.11n command line interface

Table of Contents

Network structures

wlan ssid-table edit (client)

With this command, you change or delete an entry in the SSID list.

This command is only available in the client mode.

You are in the Interface Configuration mode of the WLAN interface.

The command prompt is as follows:

cli (config-if-wlan-0-X)#

Call up the command with the following parameters:

wlan ssid-table edit <index (1-8)> {enable | disable| delete} [ssid]

The parameters have the following meaning:

The corresponding index entry in the SSID list is changed or deleted.

Further notes

You display the list with the show wlan ssid-table <wlan 0/X> command.

You delete an SSID entry with the wlan ssid-table edit <index (1-8)> delete

Index entry in the SSID list

Entry is used

Entry is not used

Entry is deleted. The ssid param‐

eter is ignored.

SCALANCE W770/W730 acc. to IEEE 802.11n Command Line Interface

Range of values / note

Enter the SSID of the access point.

The length of the character string for SSID is

1 to 32 characters. ASCII code 0x20 to 0x7e

is used for the SSID.

To be able to use spaces in the SSID, enter

the SSID in quotes:

wlan ssid-table edit "H a l l o"

Configuration Manual, 09/2017, C79000-G8976-C324-08

Show Quick Links

Table of Contents