Client Radius Supplicant - Siemens SCALANCE W780 Configuration Manual

5.9.2.4

Client Radius Supplicant

Client Supplicant
On this page, you configure the settings for the RADIUS authorization of the client.
Note
This tab is only available in the client mode.
Description
The table has the following columns:
● Radio
Shows the WLAN interface.
● Dot1x Username
Enter the user name with which you want to log on to the RADIUS server.
● Dot1x User Password
Here, enter the password for the user name selected above. The client logs on with the
RADIUS server using this combination.
For password assignment, ASCII code 0x20 to 0x7e is used.
● Dot1x User Password Confirmation
Confirm the password.
● Dot1x Check Server Certificate
Specify whether or not the RADIUS server identifies itself to the client using a certificate.
● Dot1x EAP Types
Specify the authentication method. The following methods are available:
– Auto
– EAP-TLS
– EAP-TTLS
– PEAP
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 03/2015, C79000-G8976-C267-08
EAP-TLS, EAP-TTLS or PEAP is used depending on the capability of the other
station.
Client logs on using a certificate.
The client logs on with the RADIUS server using the user name and password
The client logs on with the RADIUS server using the user name and password.
Configuring with Web Based Management
5.9 "Security" menu
279