Removing Toner Supply Motor; Hopper Strring Motor; Before Removing Hopper Stirring Motor; Removing Hopper Stirring Motor - Canon imageRUNNER 5065 series Service Manual

Chapter 7
of the arrow.
- 1 screw [1]
[1]
3) Remove the toner bottle.
4) Remove the hopper assembly [3].
If tilting the hopper assembly, toner will be spilled out; thus, be sure to re-
move it without tilting.
- 1 connector [1]
- 5 screws [2]
[2] [3]
[1]

7.10.12 Hopper Supply Motor

7.10.12.1 Before Removing Toner Supply Motor
iR5065 / iR 5055 / iR5075 / / /
1) Detach the front cover. (page 10-11)Reference[Removing the Front
Cover]
2) Detach the toner supply cover. (page 10-12)Reference[Removing the
Toner Supply Cover]
3) Remove the primary fan duct. (page
Primary fan Duct]
4) Detach the right cover (upper). (page 10-10)Reference[Removing the
Right Cover (Upper)]

7.10.12.2 Removing Toner Supply Motor

iR5065 / iR 5055 / iR5075 / / /
1) Open the manual feeding tray cover.
2) Remove the 3 screws [1].
3) Slide the lever [2] slightly upward, and detach the hopper front cover [3].
7-26
[2]
F-7-69
[2]
[2]
F-7-70
10-27)Reference[Removing
[1]
4) Remove the toner supply motor [3].
- 1 connector [1]
- 3 screws [2]
[2]
[3]
[2]

7.10.13 Hopper Strring Motor

7.10.13.1 Before Removing Hopper Stirring Motor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the front cover. (page 10-11)Reference[Removing the Front
Cover]
2) Detach the toner supply cover. (page 10-12)Reference[Removing the
Toner Supply Cover]
3) Remove the primary fan duct. (page
0015-8340
Primary fan Duct]
4) Detach the right cover (upper). (page 10-10)Reference[Removing the
Right Cover (Upper)]

7.10.13.2 Removing Hopper Stirring Motor

iR5065 / iR 5055 / iR5075 / / /
1) Free the harness from the cord guide [2].
- 1 connector [1]
2) Remove the hopper drive unit [4] by sliding it in the direction of the arrow.
- 4 screws [3]
0015-8341
[2] [3]
F-7-71
[1]
F-7-72
10-27)Reference[Removing
[1]
0015-6673
0015-8342