Removing The Vertical Path Upper Motor; Vertical Path Duplex Motor; Before Removing The Vertical Path Duplex Motor; Removing The Vertical Path Duplex Motor - Canon imageRUNNER 5065 series Service Manual

Chapter 8
Rear Cover (Upper)]
3) Detach the rear cover (lower). (page 10-11)Reference[Removing the
Rear Cover (Lower)]
4) Detach the right cover (upper rear). (page 10-10)Reference[Removing
the Right Cover (Upper Rear)]
5) Detach the right cover (lower rear). (page 10-10)Reference[Removing
the Right Cover (Lower Rear)]
6) Detach the main controller
15)Reference[Removing the Main Controller Box Cover]
7) Remove the main controller box. (page 4-13)Reference[Removing the
Main Controller Box]
8) Remove the collecting
28)Reference[Removing the Collecting Toner Bottle Holder]

8.10.27.2 Removing the Vertical Path Upper Motor

iR5065 / iR 5055 / iR5075 / / /
1) Remove the vertical path upper motor [3].
- 2 screws [1]
- 1 connector [2]
[3] [1]

8.10.28 Vertical Path Duplex Motor

8.10.28.1 Before Removing the Vertical Path Duplex
Motor
iR5065 / iR 5055 / iR5075 / / /
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-20)Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-11)Reference[Removing the
Rear Cover (Upper)]
3) Detach the rear cover (lower). (page 10-11)Reference[Removing the
Rear Cover (Lower)]
4) Detach the right cover (upper rear). (page 10-10)Reference[Removing
the Right Cover (Upper Rear)]
5) Detach the right cover (lower rear). (page 10-10)Reference[Removing
the Right Cover (Lower Rear)]
6) Detach the main controller
15)Reference[Removing the Main Controller Box Cover]
7) Remove the main controller box. (page 4-13)Reference[Removing the
Main Controller Box]
8) Remove the collecting
28)Reference[Removing the Collecting Toner Bottle Holder]

8.10.28.2 Removing the Vertical Path Duplex Motor

iR5065 / iR 5055 / iR5075 / / /
1) Remove the vertical path duplex motor [3].
- 3 screws [1]
- 2 connectors [2]
8-40
box cover. (page
toner bottle holder. (page
[2] [1]
F-8-129
box cover.
(page
toner bottle holder.
(page
10-
[1]
5-
0015-5211

8.10.29 Vertical Path Lower Motor

8.10.29.1 Before Removing the Vertical Path Lower Motor

iR5065 / iR 5055 / iR5075 / / /
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-20)Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-11)Reference[Removing the
Rear Cover (Upper)]
3) Detach the rear cover (lower). (page 10-11)Reference[Removing the
Rear Cover (Lower)]
4) Detach the right cover (upper rear). (page 10-10)Reference[Removing
the Right Cover (Upper Rear)]
5) Detach the right cover (lower rear). (page 10-10)Reference[Removing
the Right Cover (Lower Rear)]
6) Detach the
15)Reference[Removing the Main Controller Box Cover]
7) Remove the main controller box. (page 4-13)Reference[Removing the
Main Controller Box]
8) Remove the
28)Reference[Removing the Collecting Toner Bottle Holder]

8.10.29.2 Removing the Vertical Path Lower Motor

iR5065 / iR 5055 / iR5075 / / /
0015-5212
1) Remove the vertical path lower motor [3].
- 3 screws [1]
- 1 connector [2]
10-
5-
0015-5217
[3]

8.10.30 Reversing Motor

8.10.30.1 Before Removing the Reversing Motor

iR5065 / iR 5055 / iR5075 / / /
[3]
[3] [2] [3]
F-8-130
main controller box cover.
collecting toner bottle holder.
[1] [2]
F-8-131
0015-5218
(page 10-
(page 5-
0015-5223
0015-9401