Canon imageRUNNER 5065 series Service Manual page 503

[1] To go to the previous page.
[2] To go to the next page.
[3] To find out the order of jams.
[4] To find out the type of jam.
[5] To find the sensor in question.
[6] To go to the previous Jam screen.
[7] To go to the next Jam screen.
<No.> Indicates the order of jams; 1 through 50 (the higher the number, the older the jam).
<DATE> indicates the date of occurrence of the jam in question.
<TIME1> indicates the time of occurrence of the jam in question.
<TIME2> indicates the time of jam recovery.
<L> indicates the location of the jam in question; 0 to 2 (0: copier; 1: feeder; 2: finisher).
<CODE> indicates the jam code in question.
<P> indicates the source of paper.
1: cassette 1
2: cassette 2
3: cassette 3
4: cassette 4
5: side paper deck
6: manual feed tray
7: duplexing assembly
<CNTR> indicates the reading of the soft counter used for the source of paper.
<SIZE> indicates the size of paper.
<ERR>
<No.> indicates how recent the error in question is.
1 to 50 (the higher the number, the older the error)
<DATE> indicates the date of occurrence of the error in question.
<TIME1> indicates the time of occurrence of the error in question.
<TIME2> indicates he error recovery time.
<CODE> indicates the error code in question.
<DTL> indicates the detail code of the error in question. (if none, '0000')
<L> indicates the location of the error in question.
0: main controller
1: DADF
2: finisher
3: not used
4: reader unit
5: printer unit
6: PDL board
7: fax board
<P> not used
<HV-STS>
Sub-item Description
PRIMARY primary charging current; in uA
PRE-TR pre-transfer (post) current; in uA
TR transfer current (1st side); in uA
SP separation current (1st side); in uA
BIAS developing bias output value DC component; in V
SP-N2 separation current (2nd side); in uA
TR-N2 transfer current (2nd side); in uA
<CCD>
Sub-item Description
TARGET-G indicates the shading target value of green.
GAIN-OG indicates the gain level adjustment value of green for CCD odd-numbered bits.
GAIN-EG indicates the gain level adjustment value of green for CCD even-numbered bits.
GAIN-OR indicates the gain level adjustment value of red for CCD odd-numbered bits.
GAIN-ER indicates the gain level adjustment value of red for CCD even-numbered bits.
<DPOT>
F-17-10
T-17-5
COPIER > DISPLAY > HV-STS
T-17-6
COPIER > DISPLAY > CCD
Chapter 17
Level
1
1
1
1
1
1
1
Level
2
2
2
2
2
17-7