Canon imageRUNNER 5065 series Service Manual page 536

Chapter 17
Sub-item Description
REMPNL Use it to enable/disable the remote panel function.
0: off (default)
1: on
BCNT-AST Use it to switch over job types for the count of the box prints with ASSIST in use.
setting
0: count as PDL job (default)
1: count as copy job
DOC-REM Use it to enable/disable the Remove Original message.
setting
0: do not indicate (default)
1: indicate
FROM-OF Set whether or not to delete a "from" address for email transmission.
Setting value:
0: Do not delete a "from" address. (default)
1: Delete a "from" address.
FILE-OF Set whether or not to prohibit email transmission to the file address.
Prohibit transmission to the file address by prohibiting input of the file address from the address book.
Setting value:
0: Do not prohibit transmission. (default)
1: Prohibit transmission.
If a file address has been already registered, the address can be used even after this mode is set to "1". Therefore, delete the address
manually.
MAIL-OF Set whether or not to prohibit transmission to the email address.
Prohibit transmission to the email address by prohibiting input of the email address from the address book.
Setting value:
0: Do not prohibit transmission. (default)
1: Prohibit transmission.
If an email address has been already registered, the address can be used even after this mode is set to "1". Therefore, delete the
address manually.
IFAX-OF Set whether or not to prohibit transmission to the IFAX address.
Prohibit transmission to the IFAX address by prohibiting input of the IFAX address from the address book.
Setting value:
0: Do not prohibit transmission. (default)
1: Prohibit transmission.
If an IFAX address has been already registered, the address can be used even after this mode is set to "1". Therefore, delete the
address manually.
LDAP-DEF Switch the default value of the LDAP server search condition.
Change the default condition for the attribute specified to search detailed information of the LDAP server.
Setting value:
0: "Name" (default)
1: "Email"
2: "FAX"
3: "Organization"
4: "Organization unit"
5: User setting 1
6: User setting 2
HDCR-DSW Set whether or not to display the menu of "ON/OFF of complete HDD deletion" in the user mode.
User mode > System administration settings > Complete HDD deletion
Setting value:
0: Do not display the menu.
1: Display the menu.
Factory setting value: 0
SIZE-DET Use it to enable/disable original size detection.
0: disable original size detection
1: enable original size detection
DATE-DSP Use it to switch over data indication format:
setting.
0: 'YY MM/DD
1: DD/MM 'YY
2: MM/DD/YY
MB-CCV Use it to limit the users of the control cards for mail boxes.
setting
0: do not limit (default)
1: limit
TRY-STP Use it to switch over operation when the finisher tray becomes full.
setting
0: normal (suspend operation when finisher tray becomes full; default)
1: suspend in relation to height detection
2: do not suspend
MF-LG-ST Use it to set the Extra Length key.
setting
0: normal (default)
1: indicate Extra Length key on supported mode screens
CNT-DISP Use it to enable/disable indication of a serial number in response to a press on the Counter Check key.
setting
0: display serial number (default)
1: do not display serial number
PH-D-SEL Select the number of lines for printing in photo mode.
0: 141 lines (default)
1: 134 lines
17-40
COPIER > OPTION >USER
Level
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2