Installing The Deck Heater; Checking The Parts To Install - Canon imageRUNNER 5065 series Service Manual

14) Attach the covers etc., by the reverse procedure to detach them.
- heat exhaust fan (filter)
- lower rear cover
- upper rear cover
- Secure the reader communication cable in the wire saddle.
15) Fit the inner units in each cassette in place, and then attach the cassettes onto the host machine.
16) Connect the power supply cable (for power outlet) of the host machine.
17) Turn on the main power switch.

2.9 Installing the Deck Heater

2.9.1 Checking the Parts to Install

iR5065 / iR 5055 / iR5075 / / /
Every components of the cassette heater unit are supplied as service parts, so have the following parts on hand.
No. Part name
[1] Heater unit
[2] AC input connector
[3] Relay harness unit
[4] AC cable
[5] Screw (w/ washer)
[6] Cable protection bush WT2-5098
[4]
[11]
[8]
[10]
[5]
[2]
[5]
[9] [12]
Part number QTY No.
FG6-9651 1pc. [7]
FG6-1117 1pc. [8]
FG6-2957 1pc. [9]
FK2-4379 1pc. [10]
XB2-7400-607 3pcs. [11]
1pc. [12]
[3]
[6]
[8]
[7]
F-2-112
T-2-6
Part name
Power supply label
Binding screw (M4 X 4)
Wire saddle (Not used for this product)
Power supply code base
Screw (w/ flat spring)
Wire saddle
[5]
[1]
Part number QTY
FS6-8725 1pc.
XB1-2400-409 4pcs.
WT2-5730 3pcs.
FC7-5473 1pc.
XB2-8401-007 1pc.
WT2-5738 1pc.
Chapter 2
0016-0491
2-33