<Card Reader Attachment-C2>
2.5.3 Power off of the host machine
iR5065 / iR 5055 / iR5075 / / /
2.5.4 Installation procedure
iR5065 / iR 5055 / iR5075 / / /
1) Open the toner replacement cover.
2) Detach the Right cover (upper)[1].
- Screw [2] 2pc.
3) Attach the card reader attachment plate [1].
- Screw (RS tightening; M4X10) [2] 2pc.
[2]
Screw (RS tightening; M4X10)
[3]
Toothed washer
[1]
F-2-72
[1]
Card reader attachment plate
[2]
Joint plate
Screw
[3]
(small panhead screw; M4X6)
[4]
Screw (RS tightening; M4X10)
How to turn off the main power
When turn off the main power, implement the following steps to protect
the hard disk of this product.
1) Push the control panel power switch for 3 sec or more.
2) Operate the touch panel following the instruction on the screen of
shutdown sequence in order to be ready to turn off the main power switch.
3) Turn off the main power switch.
4) Pull out the power cable (for the outlet).
[1]
F-2-73
1pc.
1pc.
[2]
[3]
[4]
1pc.
1pc.
1pc.
2pc.
[2]
Chapter 2
0015-4774
0015-4775
2-19