Wipe the platen board glass [1] and the ADF reading glass [2] with a cloth moistened with water or solution of mild detergent; then, dry wipe them with a dry, soft

cloth.

4. ADF Glass Retainer/Paper Guide Base

Wipe the ADF glass retainer [1] and the paper guide base [2] with a cloth moistened with water or solution of mild detergent; then, dry wipe them with a dry, soft

cloth.

5. Vertical Size Plate

Wipe the vertical size plate [1] with a cloth moistened with waste or solution of mild detergent; then, dry wipe them with a dry, soft cloth.

1.2.4.2 Checks

iR5065 / iR 5055 / iR5075 / / /

The machine is equipped with a breaker used to check for over-current and leakage current, requiring the user to check the operation of the breaker on a periodical

basis (e.g., at least once a month). Also, ask the user to keep a record of checks made.

How to Check the Breaker.

1) Turn on the main power switch.

2) Press the test button [1] of the breaker using the tip of a ball-point pen or the like.

1-16

[1]

F-1-12

[2]

F-1-13

[2]

[1]

F-1-14