Canon imageRUNNER 5065 series Service Manual page 502

Chapter 17
Sub-item Description
PCI1/2/3 indicates the board name of PCI1/2/3.
if not connected, indicates [-] (hyphen).
if connected, indicates the board name.
<Board Name>
iSLTO: wireless LAN board
Voice Board: voice guidance board
3DES+USB-HOST: security expansion board
<ANALOG>
Sub-item Description
TEMP indicates the machine inside temperature (environment sensor); in deg C
HUM indicates the machine inside humidity (environment sensor); in % RH
ABS-HUM indicates the moisture content (environment sensor); in g
FIX-U fixing roller middle temperature (main thermistor, THM1)
indicates the temperature of the middle of the fixing roller.
between 0 and 255 deg C, in increments of 1 deg C
FIX-UE fixing roller edge temperature (sub thermistor, THM2)
indicates the temperature of the edge of the fixing roller.
between 0 and 255 deg C, in increments of 1 deg C
FIX-SHTR fixing roller end temperature (shutter thermistor, THM3)
indicates the temperature of the edge of the fixing roller.
between 0 and 255 deg C.
CAP-VOL indicates the voltage level of the charger unit [target product: only iR5075]
settings range: 0 to 30 (unit: V)
The setting for the product not targeted is "---".
<CST-STS>
Sub-item Description
WIDTH-C3 indicates the width of paper in cassette 3 in terms of paper size; in mm.
WIDTH-C4 indicates the width of paper in cassette 4 in terms of paper size; in mm.
WIDTH-MF indicates the width of paper in the manual feed tray; in mm.
<JAM>
Touch the appropriate notation for details.
17-6
COPIER > DISPLAY > ACC-STS
T-17-3
COPIER > DISPLAY > ANALOG
T-17-4
COPIER > DISPLAY > CST-STS
F-17-9
Level
1
Level
1
1
1
1
1
1
1
Level
2
2
2