Installation Of Scanner; Installation Of Fixing Assembly - Canon imageRUNNER 5065 series Service Manual

Chapter 2
[1]
8) Remove the grip [1] while pressing the leaf spring with a flathead
screwdriver.
[1]
2-6
[2]
[1]
F-2-10
F-2-11
9) Remove the packing tape attached onto the host machine.

2.2.3 Installation of Scanner

iR5065 / iR 5055 / iR5075 / / /
1) Open the DADF, and remove the packing materials.
2) Remove the scanner fixing screw [1].
[1]
The scanner fixing screw will be used when relocating the machine; thus,
make sure a user stores away it.
3) Pull the release lever [1] and open the white sheet [2] in the direction of
the arrow [A].
4) Remove the protection sheet.
[1]
After the host machine is installed, if moving the machine elsewhere, put
the protection sheet.
If not, the image may be affected.
5) Close the white sheet.
6) Close the DADF.

2.2.4 Installation of Fixing Assembly

iR5065 / iR 5055 / iR5075 / / /
1) Open the front cover.
2) Shift the fixing/feeder assembly release lever [1] in the direction of the
arrow, and release the transfer/separation charging assembly. Slide the
fixing/feeder unit [2] out toward the front.
F-2-12
[2] [1]
[A]
F-2-13
F-2-14
T-2-2
0015-4657
0015-4659