4) Hold the tab (the bend) [A] of the mirror stay to move the No. 1 mirror base [1] to the right until it stops.
5) Insert the front side of the mirror heater [1] under the cable guide [2] and connect the connecter [3], and then tighten with the 2 screws (RS tightening; M4X8) [4].
[3]
F-2-89
When removing the copyboard glass, be sure not to get your fingers touched
with the glass surface or the backside of the white plate.
In case the glass is soiled, clean it with lint-free paper.