Registration Unit; Outline; Control System; Duplex Feeding Unit - Canon imageRUNNER 5065 series Service Manual

Chapter 8
[1] The position of the paper size guide plate of the cassette is changed.
[2] A paper size is registered in service mode.
SERVICE MODE:
COPIER> OPTION> CST> P-SZ-C1
Use it to specify a paper size for the right deck.
Settings:
6: A4, 15: B5, 18: LTR
COPIER> OPTION> CST> P-SZ-C2
Use it to specify a power size for the left deck.
Settings
6: A4, 15: B5, 18: LTR

8.7 Registration Unit

8.7.1 Outline

iR5065 / iR 5055 / iR5075 / / /
The registration clutch serves to make sure that the print paper and the image on the drum will match at a specific point. The timing at which the registration roller
clutch goes on may be varied in service mode (ADJUST>FEED-ADJ>REGIST).

8.7.2 Control System

iR5065 / iR 5055 / iR5075 / / /

8.8 Duplex Feeding Unit

8.8.1 Moving the Paper to the Reversing Assembly After Printing on the 1st Side

iR5065 / iR 5055 / iR5075 / / /
8-18
Registration roller
CL2
Registration drive signal
F-8-27
Main motor
M2
DC controller
PCB
0015-4563
0015-4565
0015-4566