Outline - Canon imageRUNNER 5065 series Service Manual

18.1 Outline

18.1.1 Outline of Upgrading the Machine
iR5065 / iR 5055 / iR5075 / / /
The machine and its accessories may be upgraded by replacing DIMM-ROM or using the Service Support Tool (hereafter, SST) installed on a personal computer
(PC).
The following table shows the various system software used in conjunction with the machine and how they may be upgraded.
Type Type of system software
Machine
System (main controller)
Language (language mode)
RUI (remote user interface)
Boot (boot program)
MEAP CONT (MEAP library)
SDICT (OCR dictionary)
KEY (encryption communication key)
TTS (voice dictionary)
DCON (DC controller)
RCON (reader controller)
Accessory
Multi-FAX Board
Fin_A series (Finisher-AD1/Saddle
Finisher-AE2)
DADF-S1
18.1.2 Outline of the Service Support Tool
iR5065 / iR 5055 / iR5075 / / /
The Service Support Tool (hereafter, SST) has the following functions:
The machine must be in download mode when the SST is used.
The download control program comes in 2 types:
-Normal Mode (download mode B)
turn on the main power while holding down 1+7; then, make the following selections in service mode: COPIER>FUNCTION>SYSTEM>DOWNLOAD
-Safe Mode(download mode A)
turn on the main power while holding down 2+8
Method of upgrading
SST
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Ver.3.3 or later
Service PC
SST
HDD setting information
Download system software
System software
Backup data
T-18-1
Remarks
ROM-DIMM
replacement
No The machine controller is also used to control the Super G3 Fax Board.
No
No
Yes
No
No
No
No
No
No The reader controller is also used to control the ADF.
Yes
No A special service tool (downloader PCB: FY9-2034) is needed.
No A special service tool (downloader PCB: FY9-2034) is needed.
Initialize HDD
Upload backup data
Download backup data
F-18-1
iR ----
HDD
Flash ROM
Back up RAM
Chapter 18
0015-5401
0015-5402
18-1