Motor Of Main Drive Assembly; Before Removing The Main Motor; Removing The Main Motor; Fixing Driver Motor - Canon imageRUNNER 5065 series Service Manual

[1]
[2]
[3]
4) Disconnect the connector [1].
5) Detach the circulation duct fan [3].
- Screw [2] 2pc.
[3]

10.5.31 Motor of Main Drive Assembly

10.5.31.1 Before Removing the Main Motor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the rear cover (upper). (page 10-11)Reference[Removing the
Rear Cover (Upper)]
2) Detach the main controller box cover. (page 10-15)Reference[Remov-
ing the Main Controller Box Cover]
3) Removing the Right Cover (Upper Rear). (page 10-10)Reference[Re-
moving the Right Cover (Upper Rear)]
4) Remove the main controller box. (page 4-13)Reference[Removing the
Main Controller Box]
5) Detach the right cover (lower rear). (page 10-10)Reference[Removing
the Right Cover (Lower Rear)]

10.5.31.2 Removing the Main Motor

iR5065 / iR 5055 / iR5075 / / /
1) Move the main power switch base [3] to the side.
- Screw [1] 2pc.
- Clamp [2] 2pc.
[4]
[4] [5]
F-10-114
[2]
[1]
F-10-115
[1]
2) Detach the main motor [2].
- Screw [1] 3pc.
3) Disconnect the 2 connectors [1] from the main motor [2].
0015-5170

10.5.32 Fixing Driver Motor

10.5.32.1 Before Removing the Fixing Motor

iR5065 / iR 5055 / iR5075 / / /
0015-5172
1) Detach the fixing front cover. (page 10-14)Reference[Removing the
Fixing Front Cover]

10.5.32.2 Removing the Fixing Motor

iR5065 / iR 5055 / iR5075 / / /
1) Detach the fixing motor assembly [3].
- Connector [1] 2pc.
- Screw [2] 3pc.
[2]
[1]
[3]
F-10-116
[1]
[1]
F-10-117
[2] [1]
F-10-118
Chapter 10
[2]
0015-8450
0015-5173
10-31