Canon imageRUNNER 5065 series Service Manual page 558

Chapter 18
Use safe mode for the following:
- when you have replaced the HDD.
- when the system fails to start up normally.
The following table shows the functions that may be used in download mode with the SST in use:
Installing the System Software
The system software that has been downloaded by the SST (version 3.33 or later) is saved in the temporary storage area of the HDD. You must then turn off and
then on the main power switch so that the system software will be written to the system area and flash ROM when the machine starts up. When you turn off and
then on the main power switch for a second time, the machine will start up using the new version of the system software.
18-2
on keypad, 2+8
Safe mode
program
Download mode A
Function
Formatting the HDD -
-
FSTDEV
TMP_GEN
TMP_PSS
TMP_FAX
APL_SEND
APL_MEAP
APL_GEN
PDL_DEV
FSTCDEV
Downloading the system software -System
-Language
-RUI
-Boot
-G3FAX
-Dcon
-Rcon
-SDICT
-MEAPCONT
-KEY
-TTS
Uploading/downloading backup -
data -
Main power
on keypad, 1+7
switch ON
Boot ROM
Boot program
HDD
SYSTEM program
In service mode
COPIER > FUNCTION >
SYSTEM > DOWNLOAD
normal mode
program
Download mode B
F-18-2
T-18-2
Download mode
Normal mode
(download mode B)
Entire HDD
BOOTDEV
-
-
-
-
-
-
-
-
-
-System
-Language
-RUI
-Boot
-
-Dcon
-Rcon
-SDICT
-MEAPCONT
-KEY
-TTS
-SramImg
-Meapback
Safe mode
(download mode A)