Feeder - Canon imageRUNNER 5065 series Service Manual

Sub-item Description
TR-PSLI5 Obtain a transfer license key for PS, LIPS4, and LIPS LX in transfer invalidation.
ST-LIPS5 Display the installation status of LIPS LX and LIPS4 in transfer invalidation.
TR-LIPS5 Obtain a transfer license key for LIPS LX and LIPS4 in transfer invalidation.
ST-LIPS4 Display the installation status of LIPS4 in transfer invalidation.
TR-LIPS4 Obtain a transfer license key for LIPS4 in transfer invalidation.
ST-PSPCL Display the installation status of PS and PCL in transfer invalidation.
TR-PSPCL Obtain a transfer license key for PS and PCL in transfer invalidation.
ST-PCLUF Display the installation status of PCL and UFR in transfer invalidation.
TR-PCLUF Obtain a transfer license key for PCL and UFR in transfer invalidation.
ST-PSLIP Display the installation status of PS and LIPS in transfer invalidation.
TR-PSLIP Obtain a transfer license key for PS and LIPS in transfer invalidation.
ST-PSPCU Display the installation status of PS, PCL, and UFR in transfer invalidation.
TR-PSPCU Obtain a transfer license key for PS, PCL, and UFR in transfer invalidation.
ST-LXUFR Display the installation status of LIPS LX (UFR II for overseas) in transfer invalidation.
TR-LXUFR Obtain a transfer license key for LIPS LX (UFR II for overseas) in transfer invalidation.
ST-HDCR2 Display the installation status of complete HDD deletion in transfer invalidation.
TR-HDCR2 Obtain a transfer license key for complete HDD deletion in transfer invalidation.

17.6.2 FEEDER

17.6.2.1 FEEDER List
iR5065 / iR 5055 / iR5075 / / /
Sub-item Description
SIZE-SW Use it to enable detection of a mix of AB and inch originals.
setting
0: ON (do not detect; default); 1: OFF (detect)
LS-DBL Use it to enable/disable ADF high-speed duplex mode.
setting
0: enable (execute high-speed duplex mode; normal mode; default)
1: disable (do not execute high-speed duplex mode; low-speed duplex mode)
STAMP-SW Use it to indicate the presence/absence of a stamp. (If fitted, set '1' for STAMP-SW).
setting
0: stamp absent
1: stamp present (default)
17.6.3 SORTER
17.6.3.1 SORTER List
iR5065 / iR 5055 / iR5075 / / /
Sub-item Description
BLNK-SW Use it to set the margin width on both sides of a crease when the saddle stitcher is in use.
setting
0: normal width (5 mm)
1: extra width (10 mm; default)
MD-SPRTN Use it to enable/disable accessory-independent mode in the event of a finisher error.
setting
0: normal (disable accessory-independent mode; default)
1: enable (do not staple or align)
17.6.4 BOARD
17.6.4.1 BOARD List
iR5065 / iR 5055 / iR5075 / / /
Sub-item Description
FONTDL Use it to enable/disable display of the setting screen for font service when the PS kanji font downloaded is in use.
setting
0: disable (do not display; default)
1: enable (display)
MENU-1 to 4 Use it to enable/disable display of levels 1 thorough 4 for the printer settings menu.
setting
0: disable (do not display; default)
1: enable (display)
COPIER > OPTION > LCNS-TR
T-17-59
COPIER > FEEDER > OPTION
T-17-60
COPIER > SORTER > OPTION
T-17-61
COPIER > BOARD > OPTION
Chapter 17
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0015-6262
Level
1
1
1
0015-6269
Level
1
1
0015-6272
Level
1
2
17-51