Canon imageRUNNER 5065 series Service Manual page 524

Chapter 17
Sub-item Description
MTR-ON Use it to start the operation of the motor.
Procedure
1) Select the item, and press the OK key so that the motor will repeatedly go on and off as follows:
- for 20 sec on -> off
- the hopper stirring motor and horizontal registration motor: for 10 sec, on -> off
- shift tray motor: stops at front/rear HP
Be sure to remove the toner bottle before checking the operation of the bottle motor (MTR=22); otherwise, the toner is likely to
spill out inside the machine.
SL Use it to select the solenoid whose operation you wan to check.
(range: 1 to 11)
Procedure
1) Select the item.
2) Type in the code of the solenoid using the keypad.
3) Press the OK key.
4) Press [SL-on] to check the operation.
SL-ON Use it to start the operation of the solenoid.
1) Select the item, and press the OK key so that the solenoid will repeatedly go on and off as follows: for 0.5 sec, on -> for 10 sec,
off -> for 0.5 sec, on -> for 10 sec, off -> for 0.5 sec, on -> off.
- Clutch
- Motor
- Solenoid
17-28
COPIER > FUNCTION > PART-CHK
Code Name
1 manual feed d pickup clutch (CL3)
2 left deck pull-off clutch (CL4)
3 side deck pickup clutch (CL102)
4 developing clutch (CL1)
5 registration roller clutch (CL2)
Code Name
1 laser scanner motor (M22)
2 drum motor (M1)
3 main motor (M2)
4 fixing motor (M3)
5 right deck pickup motor (M11)
6 left deck pickup motor (M24)
7 cassette 3/4 pickup motor (M12)
8 vertical path duplexing feed motor (M25)
9 vertical path lower motor (M27)
10 vertical path upper motor (M26)
11 side deck main motor (M101)
12 reversal motor (M14)
13 duplexing feed right motor (M18)
14 delivery motor (M13)
15 pre-registration motor (M17)
16 duplexing feed left motor (M19)
17 primary charging wire cleaning motor (M6)
18 pre-transfer charging wire cleaning motor (M7)
19 transfer/separation charging wire cleaning motor (M8)
20 hopper stirring motor (M9); CW rotation (feed/stirring)
21 hopper stirring motor (M9); CCW rotation (stirring)
22 bottle motor (M10)
be sure to remove the toner bottle before starting a check.
23 duplexing horizontal registration motor (M16)
24 shutter motor (M15)
25 right deck lifter motor (M4)
26 left deck lifter motor (M5)
27 cassette 3 lifter motor (M20)
28 cassette 4 lifter motor (M21)
29 side deck lifter motor (M102)
30 shift tray motor (SM101)
Code Name
1 right deck pickup solenoid (SL6)
2 left deck pickup solenoid (SL7)
3 cassette 3 pickup solenoid (SL3)
4 cassette 4 pickup solenoid (SL4)
5 manual feed release solenoid (SL2)
6 deck pickup roller release solenoid (SL101)
T-17-42
T-17-43
T-17-44
Level
1
1
1