Configuration Example For Mpls Traffic Engineering Over Bdi; Configuring Interface Tunnel Example; Configuring Rsvp Bandwidth Example - Cisco ASR 920 Series Configuration

Aggregation services router
Hide thumbs Also See for ASR 920 Series:
Table of Contents

Advertisement

Configuration Example for MPLS Traffic Engineering over BDI

Active Path Option Parameters:
InLabel
OutLabel : BDI31, 21
Next Hop : 12.0.0.2
RSVP Signalling Info:
Shortest Unconstrained Path Info:
History:
Configuration Example for MPLS Traffic Engineering over BDI
The following example enables the BDI on the router:
Router(config)#interface bdi30
Router(config-if)#mpls traffic-eng tunnels

Configuring Interface Tunnel Example

The following example configures an interface tunnel
interface Tunnel1
ip unnumbered Loopback0
tunnel source Loopback0
tunnel mode mpls traffic-eng
tunnel destination 4.4.4.4
tunnel mpls traffic-eng path-option 1 dynamic

Configuring RSVP Bandwidth Example

The following example configures RSVP bandwidth
ip rsvp bandwidth [ interface-kbps] [single-flow-kbps]
Router(config-if)# ip rsvp bandwidth 500 500
MPLS Traffic Engineering Path Calculation and Setup Configuration Guide, Cisco IOS XE Release 3S (Cisco
ASR 920 Series)
48
Bandwidth: 0
kbps (Global)
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 0 [0] bw-based
auto-bw: disabled
State: dynamic path option 1 is active
BandwidthOverride: disabled
:
-
Src 1.1.1.1, Dst 3.3.3.3, Tun_Id 5, Tun_Instance 1
RSVP Path Info:
My Address: 12.0.0.1
Explicit Route: 12.0.0.2 14.0.0.2 14.0.0.1 3.3.3.3
Record
Route:
NONE
Tspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
RSVP Resv Info:
Record
Route:
NONE
Fspec: ave rate=0 kbits, burst=1000 bytes, peak rate=0 kbits
Path Weight: 2 (TE)
Explicit Route: 12.0.0.1 12.0.0.2 14.0.0.2 14.0.0.1
3.3.3.3
Tunnel:
Time since created: 1 minutes, 38 seconds
Time since path change: 1 minutes, 36 seconds
Number of LSP IDs (Tun_Instances) used: 1
Current LSP: [ID: 1]
Uptime: 1 minutes, 36 seconds
MPLS Traffic Engineering over Bridge Domain Interfaces
Priority: 5
5
Affinity: 0x0/0xFFFF
LockDown: disabled
Verbatim: disabled

Advertisement

Table of Contents
loading

Table of Contents